| IUB copper-based non-oil bearing |
| Material Tissue |
|
|
|
1. The mixture of modified polytetrafluoroethylene (PTFE) and lead (Pb) is 0.01-0.03mm, a wear-resistant material. During operation, a transfer film can be formed to protect the grinding shaft.
2. Copper powder layer, 0.20-0.3mm, improves the bonding strength of PTFE/Pb and copper plate layer, and has good bearing capacity and wear resistance. A higher thermal conductivity can quickly transfer the heat generated during operation.
3. The copper substrate is 0.7~2.3, which improves the bearing capacity and heat transfer of the bearing and has better corrosion resistance. |
| main parameter TECHNICAL DATE |
|
|
static load
|
250N/mm2
|
|
friction coefficient
|
0.03~0.20
|
|
Maximum load
|
low speed operation
|
140N/mm2
|
|
maximum linear velocity
|
dry friction
|
2m/s
|
| |
rotation and swing motion
|
60N/mm2
|
|
|
fluid lubrication
|
5m/s
|
|
Maximum PV value
(Dry Friction)
|
intermittent operation
|
3.6N/mm2.m/s
|
|
thermal conductivity
|
70W(m.K)-1
|
| |
long-term operation
|
1.8N/mm2.m/s
|
|
linear expansion coefficient
|
17x 11-6K
|
|
operating temperature
|
-195 ℃ ~ +300 ℃
|
|
|
|
|
| Application Characteristics |
also has the following characteristics:
Because copper itself has its self-lubricating performance, it can be used for parts that need to work for a long time and cannot be stopped for maintenance, and has better corrosion resistance than SF-1. It is widely used in weak acid and strong alkali occasions, port machinery, marine machinery, metallurgical iron and steel industry, billet raceway of continuous casting machine, steel ring part of high temperature furnace, cement grouting pump and screw conveyor. It can be combined with steel sleeve on the outside, or made into flanging, and the end face and inner hole can be used for friction at the same time. |
 |
|
|
